Technology 4 Passion

Airport Express & LAN

2011-02-14T20:46:00.000+01:00

Today I wanna share with you a tip on how to configure the Airport Express to create a NATted network and share the same public IP through all the computers connected to the LAN.

In this way you can have a bit of more security toward the outside computers on the internet.

The creation of a local area network is really easy using the Airport Express, and if you want to use it to connect just a computer to internet through a modem it is straight forward:

connect the modem to the rear WAN port of the Airport
connect your RJ45 cable to the Airport switch or go wireless
turn on the Airport and it will perform all the adjustment to find the internet connection and configure it as a bridge for connecting the computer to the internet.

In this way each computer (configured in DHCP) will have an IP assigned by the router.

To create the NATted network with the Airport Extreme and hide your computers from the outside internet network open the Utility Airport on your Mac or Windows Machine and go to the Internet tab and select “Share a public IP address” from the “Connection sharing” combo like in figure below.

In this way the Airport Express will assign the IPs to the connected computers and outside the network will be seen as a single connected computer, hiding the others.

HTH

Maf Event Bus

2010-11-25T22:32:00.003+01:00

MAF v3 Framework (Part 2)
The cross-platform MAF Event Bus make use of Qt Signal/Slot to dispatch events between objects locally and remotely. Qt mechanism has been extended to manage also a remote communication transparently to the EventBus users and decouple the sender from the receiver allowing sending events remotely using different network connectors expandable through the strategy pattern.
Other information on MAF v3 framework can be found here: MAF Site

Maf Event Bus

View more presentations from Paolo Quadrani.

Interface Design Basics

2010-11-16T00:35:00.001+01:00

Interesting presentation on Interface Design:

Interface Design Basics (english)

View more presentations from Samo Korošec.

Maf3 - Part 1

2010-10-05T22:12:00.001+02:00

Check out this SlideShare Presentation:

Maf3 - Part 1

View more presentations from Paolo Quadrani.

f8 Conference

2010-04-28T22:32:00.002+02:00

Today I watched Mark Zuckerberg presenting at the f8 Conference (recorded on 21st April 2010).
It was very interesting to listen on how Internet could become with connections between different social network. We could have a better social experience and retrieve information from the Internet in a manner that is tailored just for us.

Enjoy the movie and thanks for reading :)

Watch live streaming video from f8conference at livestream.com

Touch screen on skin

2010-03-03T22:56:00.000+01:00

Researchers at Microsoft are working on ways to bring about any type of surface (in this case the skin) touch screen technology.
To achieve this goal, the researchers used a pico-projector and a special microphone that allows you to intercept the pressure on the skin through your fingers. The system is called Skinput.

The projector can display the user interface, while the microphone determines the position based on the physical principle of transmission of waves transmitted through the body.
The video below shows how to create touch screen interface using the arm of a person as a "screen" touch.

Thanks for reading :)

Man Machine integration

2010-02-15T23:20:00.001+01:00

Kevin Warwick in this video talk about an interesting point of view about man-machine integration as a way to expand our knowledge and potentials.
Human race can be more powerful and can see things in different way and with different perspectives if it accepts a mix artificial intelligence, robotics and implants.
Take a look at this fascinating video of professor Warwick at University of Reading's Cybernetics.

Thanks for reading and leave your comments :)

WiLink 7.0 Texas Instruments: WiFi, GPS, BlueTooth and FM all together

2010-02-10T22:44:00.000+01:00

Texas Instruments has presented the new chip that will solve most problems of wireless connectivity for mobile devices: WiLink 7.0.
This is one of the first quad-chip for mobile devices that integrate WiFi (IEEE 802.11n), Bluetooth, GPS and Radio FM in a single chip so to decrease the costs of 30% and space occupied of the 50%.

Devices will have wireless capabilities without loosing performances. Analysts foreseen that within 2013 will be sold more then 4.5 billions of radio-combined chips.

Thanks for reading :)

Electric cars are becoming more of a concept

2010-01-25T21:41:00.001+01:00

Recently we witnessed the completion of the VOLTA by the GM, Fiat 500 and now the Venturi Voltage concept car presented at the NAIAS 2010 (image below).

All these cars have in common the use of more or less efficient batteries to power the electric motor.
I think the real revolution will happen when you do not think only to accumulate energy, but also how to produce it. A car can increase its autonomy in a much greater than the average current only if it is equipped with systems of energy production. Examples could be producing energy from the sun, the use of air currents that are formed during the movement of the car itself and the conversion into electricity of heat developed by electric motors.

I believe that technological innovation in this sector is just beginning and maybe this could lead to something completely innovative rethinking the concept of mobility.

Thanks for reading and leave your comments.

Augmented reality and aerial drone. There's an app also for that.

2010-01-10T00:49:00.000+01:00

Parrot has been demonstrating at the 2010 CES show in Las Vegas the AR.Drone, a Wi-Fi helicopter with dual cameras and augmented-reality video streaming, that you control using your iPhone or iPod Touch. The AR.Drone features four rotors and interchangeable hulls for flying both indoors and outside. Built-in flight stabilization technology keeps the drone steady while you use your iPhone’s motion sensors to steer it remotely over the craft’s Wi-Fi network.
Parrot spent four years developing the AR.Drone and creating an augmented reality gaming platform. Using its streaming video camera, the AR.Drone image processing can detect other drones or 3D targets. Several demo games are on display, but Parrot hopes that game developers will take advantage of their open API to develop more games and other applications for the AR.Drone.
To make the AR.Drone easy to fly, Parrot developed a microelectromechanical (MEMS) inertial guidance system that includes a three-axis accelerometer, a two-axis gyroscope, and a single-axis precision gyroscope for yaw. The flyer also includes an ultrasonic altimeter and a down-facing video camera for calculating speed and position. By tilting your iPhone or iPod Touch you can drive the drone. The built-in Wi-Fi network is used to establish the connection between the drone and the iPhone, then the video camera on the drone streams its feed directly to the screen on your iPhone. If you remove your finger from the iPhone, the AR.Drone’s autopilot keeps the drone hovering about a meter off the ground. If the network connection is lost, the autopilot will stabilize the drone and slowly lower it to the ground for a soft landing.
Parrot hopes to make the AR.Drone available in the second half of 2010. For more information visit ardrone.parrot.com. For details about the open API, visit projects.ardrone.org.

Thanks for reading :)

New battery made from paper

2009-12-08T21:43:00.000+01:00

New type of battery is coming. Researchers at Stanford University are using carbon nanotubes with silver nanowires to realize ink to be printed over a standard piece of paper and realize a a low-cost battery or supercapacitor that is ultra lightweight.

Professor Yi Cui said that this type of battery is more durable due to the fact that the ink adheres strongly to the paper. The paper supercapacitor may last through 40000 charge-discharge cycles.

The flexibility of the paper allows many practical applications like using it in electric or hybrid cars.

The experiment shown also in the video where focused on using paper battery to turn on a LED, which glowed brightly.

"This technology has potential to be commercialized within a short time," said Peidong Yang, professor of chemistry at the University of California-Berkeley. "I don't think it will be limited to just energy storage devices," he said. "This is potentially a very nice, low-cost, flexible electrode for any electrical device."

A new baby is born

2009-12-02T18:49:00.000+01:00

Today I want to announce that a new blog is born: iPhone 4 Passion (yes I know, I had not to much fantasy ;) ). This is a specialized blog I decided to create only for iPhone/iPod Touch and Objective-C programming.

For now I migrated the two presentations that you can find also in this blog, but soon I intend to enrich the blog with code examples, better tips and tricks and other useful information on this awesome device.
So stay tuned and hope to hear soon your comments, impressions, suggestions and so on.

iPhone/iPod Tips & Tricks (...continue...)

2009-11-26T01:05:00.005+01:00

Today I want to give you another Tips & Tricks for iPhone/iPod; this time regarding screen snapshots and a fast way to go at the top of a list.

Capture the screen
You can take a screenshot of any application you are using, simply pressing the Home button together to the Sleep/Wake button.
This snapshot will be saved into the 'Camera roll' of the iPhone or in 'Saved Images' for iPod.

Go to the Top
When you are reading a web page, an e-mail or a SMS, you can go to the beginning of the page simply tapping onto the status bar.

This is useful specially if you are navigating a web page and want to reach the head of the page in one tap or you are in the SMS application and want to call the sender of the message where the button to call is at the top of the page.

See the previous post on iPhone/iPod Tips & Tricks.

Thanks for reading :)

Password, safety and Social Engineering for beginners

2009-11-24T13:16:00.004+01:00

One of the many ways to protect our information is that of blind with the passwords. These can be of varying complexity and managed by our memory (safest ever, but limited :) in time and in the number of different passwords to remember) or software that allow you to manage, store and / or generate new keys.
Examples of applications are 1Password, KeePass for Mac and Windows or Roboform.

When you surf the web or you are prompted for a password should always pay attention to who is asking us our credentials: it is a trusted site or are about to bite a phishing scam?

Nothing can be safe also using the best cryptex to encrypt our information if we leave our passwords written on post-it or we fall in a phishing site. Social Engineering is well known act aimed to manipulate people and get their information, passwords and so on.

Always check whether you are accessing via HTTPS or via simple HTTP.
In one case the password is transferred from client to server in encrypted manner, so do not be deciphered by any sniffer in the second case (HTTP), the password is transferred in "clear", then a sniffer to read quietly in the information and we are potentially an unsafe condition.

Another IMPORTANT rule is to NOT store anywhere you access codes for your online bank account. Remember that each system is potentially unsafe and can be "hacked" :)

Thanks for reading :-)

Social Sensor Network

2009-11-20T02:04:00.004+01:00

Today I was attracted by two news:

Hardware add-on for iPhone-iPod: iCarte NFC/RFID Reader. This device allows iPhone/iPod users to be enabled for Near Field Communication (NFC) for contact-less payments and Radio Frequency Identification (RFID).
HP Labs with a project called CeNSE (Central Nervous System for the Earth) which use billions of tiny, cheap tough and exquisitely sensitive detectors.
"... The technology behind this is based on nano-sensing research done by HP Labs. The sensors are similar to RFID chips, but in this case they are tiny accelerometers which detect motion and vibrations. The first CeNSE sensor to be put into the field by HP Labs is, according to the company, "about 1,000 times more sensitive than accelerometers used in a Wii, an iPhone or an automobile's airbag system." Other sensors planned in future include ones for light, temperature, barometric pressure, airflow and humidity."

I'm always fascinated by electronic devices and specially if they are used for solving people problems, making life better and/or safer for all.

A possible scenario as combination of both devices could be to built a map globally accessible with the results of signals detected by those sensors (for example the temperatures measured or motion detection for detecting earthquakes or other possible dangers). The role of iPhone could be to activate the read of the measure when it is near the sensor (by RFID activation) and send a tweet on a dedicated channel automatically or making a dedicated application that updates the global map via twitter.

Another possibility is to generate the sensing map as a Google Earth layer. The iPohne can then contribute to this map by uploading measure coming from its sensors, like magnetic field measurements (for 3Gs device) and level of noise with geo-referencing those measures before upload them to the Social Sensor Network on Google Earth.

Thanks for reading ;)

First Month of life

2009-11-19T21:42:00.003+01:00

I don't want to bother you, but two days ago was the first month of life for my blog :-)
I want to say thanks to all my readers and twitter followers.
Soon the next post....

Objective-C for beginners

2009-11-17T22:24:00.007+01:00

Today I want to present to you the second lesson I prepared for the University of Bologna with a friend of mine: Omar Cafini about the bases of Objective-C programming.

The presentation wants to give an overview of Objective-C code writing and bases on how to deal with applications present on the iPhone/iPod Touch such Addressbook and ImagePicker.

One note more is about the storage and data handling, touch and multi-touch events handling and SQLite interface.
For more, watch the slideshow and post your feedback:

Parte II Objective C

View more presentations from Paolo Quadrani.

The slideshow of the first lesson is available here.
Thanks for reading :-)

iPhone/iPod Tips & Tricks

2009-11-14T22:49:00.004+01:00

Today I wanna start the first episode of a long series of Tips & Tricks for iPhone/iPod so to make better your iPhone/iPod life :)

In this first episode we will see how to make accented characters with the iPhone keyboard:

Open whatever app that show the keyboard like the Note app and start writing your text.
Now for writing the accented character (for example à) tap the 'a' character on the keyboard and take for one second your finger over the character. Will appear all the combination of accents available for that character.
Without releasing your finger from the screen simply go over the accented character you want to insert, then release the finger from the screen; the accented character will be inserted.

Thanks for reading and see you on next episode :-)

iPhone Development Tools

2009-11-12T21:59:00.001+01:00

Today I want to share with you a slide show presenting the basics on iPhone development tools which a friend of mine made for the University of Bologna (Italy).

iPhone Development Tools

View more presentations from Omar Cafini.

On the next days I'll public the second episode.
Enjoy the show :-)

Wearable gesture interface

2009-11-10T21:29:00.000+01:00

Today I want to talk about a movie I saw on You Tube from WUW - sixthsense about a wearable computer and a gestural interface. I have to say that it's a very good job.
I think that gesture recognition will be the future interface for devices; Nintendo given us a success example with its Wii and now also Microsoft with Project Natal. I have to admit that those two examples are indoor examples, for outdoor the interaction could be different.

These gays on YouTube video made a great job, but another time we are going to replicate a Desktop or Laptop usage and behavior into those wearable devices.
Do you imagine that someone of you will go walking around the city dressing a projector and moving its hands like a "Robocop"? I won't do :-).
I think that: Interaction do the difference.

We have to keep in mind that people in general (the so called street man) has not technical background and takes time to accept and use a different technology specially if this technology has a high level of complexity. People are frightened by the complexity.
The hardware stuff should be away from the human body, should be placed in the surrounding environment and recognize normal and standard gesture that people do normally.

We need to push the computer in the direction of humans, not vice versa if we want the natural interaction and acceptable gesture recognition.

I've not the solution on my pocket, but I think that this process can be achieved by the collaboration not only between informatics, but involving also experts in sociological disciplines.
Natural interaction is not an informatics story, it is related to human behavior.
This will impact also in other fields and technology applications like the home automation (soon I'll post something on it).
What do you think? which is your preferred interaction modality?

Thanks for reading :-) Feel free to leave your comments (only registered).

Environment ... Variables on Mac OSX

2009-11-08T01:34:00.000+01:00

Today I was fighting with Qt Creator and environment variables on Mac OSX.
Macintosh has a clean way to encapsulate software: the .app extension is in reality a folder in which are contained resources, the application's executable and other files needed to the application. In this way if you have to uninstall an application you have just to trash this .app container and you have trashed everything. But.
If you want to make a software dependent on something else present in your machine and you want to be portable and cross platform an elegant way is to use environment variable to tell your software where to find its dependencies without the needs to ask other developers to change something in the source code.
In Windows, which leave with distributed pieces of code, was very easy to allow Qt Creator to see the env variable, just put a new custom variable into "System -> Preferences -> Environment Variables", then start Qt Creator and your variable is there.
With Mac OSX you can assign environment variables in different ways for different purposes. The environment used for application is not the environment you get when starting the Terminal application.
For Terminal application, environment variable can be set in the .profile file situated in your home folder (if it is not present you can create it).
Environment for Mac OSX applications is determined at login from the file: environment.plist placed into the .MacOSX folder situated in your home folder (again, if the .MacOSX folder does not exist you can create it and create inside it the environment.plist file).
Now you can edit the file and add your custom variables (by editing the file with Property List Editor application) that will be read from Mac OS applications at login.

I had just to logout and login, start Qt Creator and now magically my custom env variable was there :-)

Thanks for reading and feel free to leave a comment (only registered users) :-)

Augmented Reality on iPhone Apps

2009-11-04T22:56:00.000+01:00

Today I want to talk about something popular in the iPhone golden world and is becoming a "must" for all the new cool applications: Augmented Reality.
Augmented Reality is a superimposing of a virtual objects generated from a computer with the real world captured from a camera. Synthetic object are placed into the real world by register them with the real space. A complete definition of Augmented Reality can be found in Wikipedia.
Who see the scene, perceive that the synthetic object is immersed into the real world.
Conventionally this technique is used to augment information given by the real world like for example superimposing a radiography or a tomography image of a patient over the real image of the patient itself.
This imply that your virtual world has to be registered with the real one by using drown patterns (like for example ARToolkit does) or marker placed on real world.
Recently, iPhone application shown this technique a bit altered (from the classical definition of AR) in my opinion. The synthetic elements shown in the device were not directly correlated to the images shown by the camera, but instead they were related with the position or orientation of the device.
I think that we are still far from having the "real" Augmented Reality on mobile devices with real-time rendering and high resolution that will do the user believe that what he is seeing is real.

Thanks for reading and feel free to leave a comment :-)

The Magic of the mouse

2009-10-29T19:37:00.000+01:00

Today I wanna talk about the Apple "Magic Mouse" that has been presented few days ago.
This is a little pearl of HID. Finally Apple removed that small ball from its mouse.
Personally I find that that little ball is quite unusable and easy to breaks.
This new one mouse is amazingly well designed and it recognize gestures, in fact the surface is touch sensitive and is a unique button like the track pad present in Macbook Pro laptops.
Complete specifications can be found at Apple website.
All its functions can be customized into the Settings panel, but options are a bit limited; for example you can not control functions like Exposè or functionality for rotation. To achieve those functions you need to touch the Mac keyboard again. Another point is that this mouse under Windows is recognized like a 2 button mouse and nothing else.
I think that in future Apple will update these feature through software updates. Should be useful also if its functionality will become accessible to software developers so that gesture can be used into developed applications.

Thanks for reading :-)

Check the obvious

2009-10-26T23:02:00.000+01:00

Today each of us use to put in Stand-by almost all the devices commonly used at home.
This mechanism doesn't mean that the corresponding device doesn't consume power; the device will consume anyway lower energy, but will do.

Make an experiment: turn off all the devices that normally should stay turned on (like the fridge) and leave in Stand-by all the others (Hi-Fi, TV, DVD Player...).
Now go to your electricity counter and measure the time interval (in seconds) between two flashes of the red led. The electricity counter measure utilized electricity in Kwh. Divide 3600 per time you measured before; this result is the Kw that your devices use for Stand-by. You will be surprised that this number will not be so small as you believed.

To reduce drastically the electricity consumption you should use sockets with a switch that will interrupt the electric circuit between the device plugged into the socket and the electric network. The consumption of that device will be null.

Thanks for reading :-)

Unique Charger or Witricity?

2009-10-22T20:58:00.000+02:00

Today attracted my attention the news on the definition of unique charger for all electronic devices: UCS (Universal Charging Solution).
Starting from 2010 all devices should adopt this UCS system that will be based on mini USB connector to facilitate users' life and reduce electronic trash. I think that this is a good think but not the final step :-)

Personally I think that is more interesting and useful the concept of charging devices without the use of any charger at all. Witricity is the solution for that.
Studies on wirelessly power electronic devices has been around from a while; Nikola Tesla made experiments since from late nineteenth century by transferring energy from a source to an incandescent light bulbs.
For example systems that charge wirelessly power devices could be distributed around in the world or in your house or car. When you are near one of these, your mobile phone will be recharged automatically.

Lets see in the near future what will be. For now PowerMat is going to sell a wireless charger at low price, some information can be found here: http://www.powermateu.com/pm_uk/home/

Thanks for reading ;-)

Macbook HDD replacement

2009-10-21T00:40:00.000+02:00

This post will give to you a quick guide on how to replace your Macbook HDD.
Remember that I'm NOT responsible for any damage on your computer.
It just worked for me.

Step 1: Make a backup
Before starting removing your HDD make a backup of all your data. For users that have Leopard installed, just turn on Time Machine (if you haven't done yet before).
On my opinion this is the best backup software freely available on your computer.
Obviously the backup should be done into an external HDD (like a USB Hard drive) or using Time Capsule.

Step 2: Turn off the computer and remove the HDD
Shutdown your computer and unplug all connectors.
Turn over your MacBook and remove the battery by opening the panel that cover it:

Then remove the HDD by using a Philips #0 screwdriver

Disconnect the old HDD and connect the new one.

IMPORTANT: there are 4 mounting screws on the sides of the old HDD that allows it to be taken safely into the HDD socket. remove the ones from your old drive and mount them on the replacement drive before you install it.

Now mount the new HDD in the Hard disk location, fix it with the screw and put the battery in its previous location.
Close the cover panel.

Step 3: Recovering the previous system backup on the new HDD
Before continuing, keep with you the installation DVD.
Connect the power cable, the external HDD that contains the Time Machine backup and if everything has been done with care you can turn on the Macbook power :-)
Insert immediately the installation DVD and take pressed the C key until the installation procedure starts from the DVD.
If you are not quick don't worry, just turn off the Macbook and restart it by taking the C key pressed again to allow the system to start from the DVD.

When the Mac OS Installation program shows you the first screen-shot, go into the Utilities menu and choose Dist Utility to create a partition on the new HDD. Call it Macintosh HD.
Then quit the Disk Utility.

Go again into the Utilities menu and now choose the Restore System from Backup.
This option allows you to choose the Time Machine backup from the external HDD and as destination dish choose obviously the new HDD named Macintosh HD.
Start the process and depending on the amount of the backup you have it can take a wile. In my case it took almost 1 hour.

After that the backup is restored, system will restart and you'll be in the sabe situation in which you turned off the Macbook before starting this process, with all the applications installed and everything running :-)

Bye for now and thanks for reading.

Hello World!!

2009-10-17T22:00:00.000+02:00

This is my first post!
I hope that it will be an exciting and interesting adventure :-)

Technology 4 Passion

Airport Express & LAN

Maf Event Bus

Interface Design Basics

Maf3 - Part 1

f8 Conference

Related articles by Zemanta

Touch screen on skin

Related articles

Man Machine integration

WiLink 7.0 Texas Instruments: WiFi, GPS, BlueTooth and FM all together

Electric cars are becoming more of a concept

Augmented reality and aerial drone. There's an app also for that.

New battery made from paper

A new baby is born

iPhone/iPod Tips & Tricks (...continue...)

Password, safety and Social Engineering for beginners

Social Sensor Network

First Month of life

Objective-C for beginners

iPhone/iPod Tips & Tricks

iPhone Development Tools

Wearable gesture interface

Environment ... Variables on Mac OSX

Augmented Reality on iPhone Apps

The Magic of the mouse

Check the obvious

Unique Charger or Witricity?

Macbook HDD replacement

Hello World!!